Cold Shrink Termination & Joint for 8.7kV/15kV XLPE Cable

Detailed Product Description
Characteristics:
1) It does not require heating by flame or special tools. As long
as we pull out the plastic string from silicone rubber tube, the
silicone rubber will be tightly shrunk in the needed position
2) Reliable insulation and high-recovery elasticity; we have adopted
imported liquid-silicone rubber, such that the cable will keep
its radial pressure permanently, making the contact surface
closely jointed together, thus no flash-ores occur, nor strike
as well
3) Superior hermetic sealing: for cable splicing, we adopt triple
hermetic sealing technology and silicone rubber with hermetic
and hydrophobic performance; these will be no serious fault due
to environmental causes
4) Easy/convenient installation: By enlarging the dimension of
stress-cone, larger tolerance will be permitted and faults due
to installation are reduced to a minimum
5) Wide application: possessing a series of superior performances
such as antipollution, long usage, hydrophobic,
cold-withstanding, etc. The cold shrinkable accessories can be
widely used in various regions, especially suitable for high
level region, cold weather region, high-humidity region, salt-fog
region and high-polluted region etc

Application: 1 core or 3 cores XLPE Cable up to 8.7kV/15kV

All types: indoor termination, outdoor termination and middle joint
are available. Specifications for 1 core or 3 core cables
are available.

Specifications:

border=0>

Performance:



Package: paper package

Inner packing:
Outdoor termination: 580 x 300 x 195mm (per set)
Indoor termination: 580 x 300 x 135mm (per set)
Straight through joint: 500 x 300 x 300mm (per set)

Outer packing:
Outdoor termination: 735 x 595 x 630mm (6 sets/carton)
Indoor termination: 620 x 595×590mm (6 sets/carton)
Straight through joint: 620×552×635mm (4 sets/carton)